View topic - [SOLVED] Correct resolution within VirtualBox :: aptosid.com :: aptosid

[SOLVED] Correct resolution within VirtualBox

aptosid.com Forum Index » Support Forums » Software

Author

Message

ganainm

Post subject: [SOLVED] Correct resolution within VirtualBox

Posted: 06.03.2013, 21:17

Joined: 2013-03-06
Posts: 4

Status: Offline

I have aptosid running within VirtualBox running on a Ubuntu host on a ThinkPad T400 with a resolution of 1440z900. However, xrandr on tha aptosid guest says:

Code:

Screen 0: minimum 64 x 64, current 1440 x 1050, maximum 32000 x 32000

VBOX0 connected 1440x1050+0+0 0mm x 0mm

   1024x768       60.0 +   60.0

   1600x1200      60.0

   1440x1050      60.0*

   1280x960       60.0

   800x600        60.0

   640x480        60.0

How can I tell xrandr to use a resolution of 1440x900 instead of 1440x1050? Where is the VBOX0 geometry defined (I did not find anything within the VirtualBox manager)?

Last edited by ganainm on 10.03.2013, 11:31; edited 1 time in total

towo

Post subject: RE: Correct resolution within VirtualBox

Posted: 06.03.2013, 21:19

Joined: 2010-09-13
Posts: 513
Location: Pößneck / Thüringen
Status: Offline

And your /var/log/Xorg.0.log looks like what?

_________________

Code:

System:    Host: lenovo-nb Kernel: 4.1.0-towo.1 x86_64 (64 bit) Desktop: Cinnamon 2.4.8

           Distro: siduction 14.1.0 Indian Summer - cinnamon - (201411230307)

ganainm

Post subject:

Posted: 07.03.2013, 06:34

Joined: 2013-03-06
Posts: 4

Status: Offline

The current Xorg.0.log is

Code:

[    29.395] 

X.Org X Server 1.12.4

Release Date: 2012-08-27

[    29.395] X Protocol Version 11, Revision 0

[    29.395] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian

[    29.395] Current Operating System: Linux neuromancer-aptosid 3.8-0.slh.2-aptosid-amd64 #1 SMP PREEMPT Mon Feb 25 19:02:00 UTC 2013 x86_64

[    29.395] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8-0.slh.2-aptosid-amd64 root=UUID=719c76bf-af60-4b5f-85b6-28f4faa8956c ro quiet

[    29.395] Build Date: 23 February 2013  02:40:45PM

[    29.395] xorg-server 2:1.12.4-5 (Julien Cristau <jcristau>) 

[    29.395] Current version of pixman: 0.26.0

[    29.395]    Before reporting problems, check http://wiki.x.org

   to make sure that you have the latest version.

[    29.395] Markers: (--) probed, (**) from config file, (==) default setting,

   (++) from command line, (!!) notice, (II) informational,

   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    29.396] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  7 07:13:06 2013

[    29.436] (==) Using config directory: "/etc/X11/xorg.conf.d"

[    29.436] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    29.515] (==) No Layout section.  Using the first Screen section.

[    29.515] (**) |-->Screen "Screen0" (0)

[    29.515] (**) |   |-->Monitor "ThinkMon"

[    29.516] (==) No device specified for screen "Screen0".

   Using the first device section listed.

[    29.516] (**) |   |-->Device "Default"

[    29.516] (==) Automatically adding devices

[    29.516] (==) Automatically enabling devices

[    29.589] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    29.589]    Entry deleted from font path.

[    29.646] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.

[    29.646]    Entry deleted from font path.

[    29.673] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.

[    29.673]    Entry deleted from font path.

[    29.673] (==) FontPath set to:

   /usr/share/fonts/X11/misc,

   /usr/share/fonts/X11/100dpi/:unscaled,

   /usr/share/fonts/X11/75dpi/:unscaled,

   /usr/share/fonts/X11/100dpi,

   /usr/share/fonts/X11/75dpi,

   built-ins

[    29.673] (==) ModulePath set to "/usr/lib/xorg/modules"

[    29.674] (II) The server relies on udev to provide the list of input devices.

   If no devices become available, reconfigure udev or disable AutoAddDevices.

[    29.674] (II) Loader magic: 0x7faa28647ae0

[    29.674] (II) Module ABI versions:

[    29.674]    X.Org ANSI C Emulation: 0.4

[    29.674]    X.Org Video Driver: 12.1

[    29.674]    X.Org XInput driver : 16.0

[    29.674]    X.Org Server Extension : 6.0

[    29.677] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728

[    29.678] (II) Open ACPI successful (/var/run/acpid.socket)

[    29.678] (II) LoadModule: "extmod"

[    29.693] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so

[    29.706] (II) Module extmod: vendor="X.Org Foundation"

[    29.707]    compiled for 1.12.4, module version = 1.0.0

[    29.707]    Module class: X.Org Server Extension

[    29.707]    ABI class: X.Org Server Extension, version 6.0

[    29.707] (II) Loading extension SELinux

[    29.707] (II) Loading extension MIT-SCREEN-SAVER

[    29.707] (II) Loading extension XFree86-VidModeExtension

[    29.707] (II) Loading extension XFree86-DGA

[    29.707] (II) Loading extension DPMS

[    29.707] (II) Loading extension XVideo

[    29.707] (II) Loading extension XVideo-MotionCompensation

[    29.707] (II) Loading extension X-Resource

[    29.707] (II) LoadModule: "dbe"

[    29.707] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so

[    29.717] (II) Module dbe: vendor="X.Org Foundation"

[    29.717]    compiled for 1.12.4, module version = 1.0.0

[    29.717]    Module class: X.Org Server Extension

[    29.717]    ABI class: X.Org Server Extension, version 6.0

[    29.717] (II) Loading extension DOUBLE-BUFFER

[    29.717] (II) LoadModule: "glx"

[    29.717] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    29.765] (II) Module glx: vendor="X.Org Foundation"

[    29.766]    compiled for 1.12.4, module version = 1.0.0

[    29.766]    ABI class: X.Org Server Extension, version 6.0

[    29.766] (==) AIGLX enabled

[    29.768] (II) Loading extension GLX

[    29.768] (II) LoadModule: "record"

[    29.770] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so

[    29.773] (II) Module record: vendor="X.Org Foundation"

[    29.773]    compiled for 1.12.4, module version = 1.13.0

[    29.773]    Module class: X.Org Server Extension

[    29.773]    ABI class: X.Org Server Extension, version 6.0

[    29.773] (II) Loading extension RECORD

[    29.773] (II) LoadModule: "dri"

[    29.773] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so

[    29.797] (II) Module dri: vendor="X.Org Foundation"

[    29.797]    compiled for 1.12.4, module version = 1.0.0

[    29.797]    ABI class: X.Org Server Extension, version 6.0

[    29.797] (II) Loading extension XFree86-DRI

[    29.797] (II) LoadModule: "dri2"

[    29.797] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so

[    29.798] (II) Module dri2: vendor="X.Org Foundation"

[    29.798]    compiled for 1.12.4, module version = 1.2.0

[    29.798]    ABI class: X.Org Server Extension, version 6.0

[    29.798] (II) Loading extension DRI2

[    29.798] (==) Matched vboxvideo as autoconfigured driver 0

[    29.798] (==) Matched vesa as autoconfigured driver 1

[    29.798] (==) Matched fbdev as autoconfigured driver 2

[    29.798] (==) Assigned the driver to the xf86ConfigLayout

[    29.798] (II) LoadModule: "vboxvideo"

[    29.799] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so

[    29.836] (II) Module vboxvideo: vendor="Oracle Corporation"

[    29.836]    compiled for 1.12.4, module version = 1.0.1

[    29.836]    Module class: X.Org Video Driver

[    29.836]    ABI class: X.Org Video Driver, version 12.1

[    29.836] (**) Load address of symbol "VBOXVIDEO" is 0x7faa244ce400

[    29.836] (II) LoadModule: "vesa"

[    29.836] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    29.856] (II) Module vesa: vendor="X.Org Foundation"

[    29.856]    compiled for 1.12.1, module version = 2.3.1

[    29.856]    Module class: X.Org Video Driver

[    29.856]    ABI class: X.Org Video Driver, version 12.0

[    29.856] (II) LoadModule: "fbdev"

[    29.857] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    29.860] (II) Module fbdev: vendor="X.Org Foundation"

[    29.860]    compiled for 1.12.1, module version = 0.4.2

[    29.860]    ABI class: X.Org Video Driver, version 12.0

[    29.860] (II) VBoxVideo: guest driver for VirtualBox: vbox

[    29.860] (II) VESA: driver for VESA chipsets: vesa

[    29.860] (II) FBDEV: driver for framebuffer: fbdev

[    29.861] (++) using VT number 7

[    29.899] (WW) Falling back to old probe method for vesa

[    29.899] (WW) Falling back to old probe method for fbdev

[    29.899] (II) Loading sub module "fbdevhw"

[    29.899] (II) LoadModule: "fbdevhw"

[    29.900] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    29.943] (II) Module fbdevhw: vendor="X.Org Foundation"

[    29.943]    compiled for 1.12.4, module version = 0.0.2

[    29.943]    ABI class: X.Org Video Driver, version 12.1

[    29.944] (EE) open /dev/fb0: No such file or directory

[    29.944] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.18_Debian

[    29.945] (EE) VBoxVideo(0): Failed to initialize the VirtualBox device (rc=-102) - make sure that the VirtualBox guest additions are properly installed.  If you are not sure, try reinstalling them.  The X Window graphics drivers will run in compatibility mode.

[    29.945] (II) Loading sub module "ramdac"

[    29.945] (II) LoadModule: "ramdac"

[    29.945] (II) Module "ramdac" already built-in

[    29.945] (II) Loading sub module "fb"

[    29.945] (II) LoadModule: "fb"

[    29.949] (II) Loading /usr/lib/xorg/modules/libfb.so

[    29.966] (II) Module fb: vendor="X.Org Foundation"

[    29.966]    compiled for 1.12.4, module version = 1.0.0

[    29.966]    ABI class: X.Org ANSI C Emulation, version 0.4

[    29.966] (II) Loading sub module "shadowfb"

[    29.966] (II) LoadModule: "shadowfb"

[    29.966] (II) Loading /usr/lib/xorg/modules/libshadowfb.so

[    29.968] (II) Module shadowfb: vendor="X.Org Foundation"

[    29.968]    compiled for 1.12.4, module version = 1.0.0

[    29.968]    ABI class: X.Org ANSI C Emulation, version 0.4

[    29.968] (II) Loading sub module "vgahw"

[    29.968] (II) LoadModule: "vgahw"

[    29.968] (II) Loading /usr/lib/xorg/modules/libvgahw.so

[    29.976] (II) Module vgahw: vendor="X.Org Foundation"

[    29.976]    compiled for 1.12.4, module version = 0.1.0

[    29.976]    ABI class: X.Org Video Driver, version 12.1

[    29.976] (II) Loading sub module "dri"

[    29.976] (II) LoadModule: "dri"

[    29.976] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so

[    29.976] (II) Module dri: vendor="X.Org Foundation"

[    29.976]    compiled for 1.12.4, module version = 1.0.0

[    29.976]    ABI class: X.Org Server Extension, version 6.0

[    29.977] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32

[    29.977] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)

[    29.977] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz

[    29.977] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)

[    29.978] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0

[    29.978] (==) VBoxVideo(0): RGB weight 888

[    29.978] (==) VBoxVideo(0): Default visual is TrueColor

[    29.978] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)

[    29.978] (==) VBoxVideo(0): DPI set to (96, 96)

[    29.978] (II) UnloadModule: "vesa"

[    29.978] (II) Unloading vesa

[    29.978] (II) UnloadModule: "fbdev"

[    29.978] (II) Unloading fbdev

[    29.978] (II) UnloadSubModule: "fbdevhw"

[    29.978] (II) Unloading fbdevhw

[    29.979] (--) Depth 24 pixmap format is 32 bpp

[    31.466] drmOpenDevice: node name is /dev/dri/card0

[    31.478] drmOpenDevice: node name is /dev/dri/card0

[    31.500] [drm] failed to load kernel module "vboxvideo"

[    31.500] (EE) [drm] drmOpen failed.

[    31.500] (EE) VBoxVideo(0): DRIScreenInit failed, disabling DRI.

[    31.500] (II) VBoxVideo(0): visual configurations initialized

[    31.513] (II) VBoxVideo(0): Requested monitor count: 1

[    31.513] (II) VBoxVideo(0): Output VBOX0 using monitor section ThinkMon

[    31.513] (II) VBoxVideo(0): Output VBOX0 has no monitor section

[    31.514] (II) VBoxVideo(0): EDID for output VBOX0

[    31.514] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 50332672

[    31.514] (II) VBoxVideo(0): Year: 1990  Week: 1

[    31.514] (II) VBoxVideo(0): EDID Version: 1.3

[    31.514] (II) VBoxVideo(0): Digital Display Input

[    31.514] (II) VBoxVideo(0): Indeterminate output size

[    31.514] (II) VBoxVideo(0): Gamma: 2.20

[    31.514] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off

[    31.514] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 

[    31.514] (II) VBoxVideo(0): Default color space is primary color space

[    31.514] (II) VBoxVideo(0): First detailed timing is preferred mode

[    31.514] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600

[    31.514] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329

[    31.514] (II) VBoxVideo(0): Manufacturer's mask: 0

[    31.514] (II) VBoxVideo(0): Supported detailed timing:

[    31.514] (II) VBoxVideo(0): clock: 47.8 MHz   Image Size:  0 x 0 mm

[    31.514] (II) VBoxVideo(0): h_active: 1024  h_sync: 1026  h_sync_end 1028 h_blank_end 1030 h_border: 0

[    31.514] (II) VBoxVideo(0): v_active: 768  v_sync: 770  v_sync_end 772 v_blanking: 774 v_border: 0

[    31.514] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz

[    31.514] (II) VBoxVideo(0): Monitor name: VBOX monitor

[    31.514] (II) VBoxVideo(0): EDID (in hex):

[    31.514] (II) VBoxVideo(0):    00ffffffffffff005858000000040003

[    31.514] (II) VBoxVideo(0):    0100010380000078eeee91a3544c9926

[    31.514] (II) VBoxVideo(0):    0f505400000001010101010101010101

[    31.514] (II) VBoxVideo(0):    010101010101af120006400006300202

[    31.514] (II) VBoxVideo(0):    2200000000000000000000fd0000c800

[    31.514] (II) VBoxVideo(0):    c864000a202020202020000000fc0056

[    31.514] (II) VBoxVideo(0):    424f58206d6f6e69746f720a00000010

[    31.514] (II) VBoxVideo(0):    000a20202020202020202020202000fb

[    31.514] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0

[    31.514] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.

[    31.514] (II) VBoxVideo(0): Using hsync ranges from config file

[    31.514] (II) VBoxVideo(0): Using vrefresh ranges from config file

[    31.514] (II) VBoxVideo(0): Printing DDC gathered Modelines:

[    31.514] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)

[    31.514] (II) VBoxVideo(0): Printing probed modes for output VBOX0

[    31.514] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz Pb)

[    31.514] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)

[    31.514] (II) VBoxVideo(0): Modeline "1440x1050"x60.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)

[    31.514] (II) VBoxVideo(0): Modeline "1280x960"x60.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)

[    31.514] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)

[    31.514] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)

[    31.514] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)

[    31.514] (II) VBoxVideo(0): Output VBOX0 connected

[    31.514] (II) VBoxVideo(0): Using exact sizes for initial modes

[    31.515] (II) VBoxVideo(0): Output VBOX0 using initial mode 1024x768

[    31.515] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[    31.515] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    31.515] (==) VBoxVideo(0): DPMS enabled

[    31.515] (--) RandR disabled

[    31.515] (II) Initializing built-in extension Generic Event Extension

[    31.515] (II) Initializing built-in extension SHAPE

[    31.515] (II) Initializing built-in extension MIT-SHM

[    31.515] (II) Initializing built-in extension XInputExtension

[    31.515] (II) Initializing built-in extension XTEST

[    31.515] (II) Initializing built-in extension BIG-REQUESTS

[    31.515] (II) Initializing built-in extension SYNC

[    31.515] (II) Initializing built-in extension XKEYBOARD

[    31.516] (II) Initializing built-in extension XC-MISC

[    31.516] (II) Initializing built-in extension SECURITY

[    31.516] (II) Initializing built-in extension XINERAMA

[    31.516] (II) Initializing built-in extension XFIXES

[    31.516] (II) Initializing built-in extension RENDER

[    31.516] (II) Initializing built-in extension RANDR

[    31.516] (II) Initializing built-in extension COMPOSITE

[    31.516] (II) Initializing built-in extension DAMAGE

[    31.516] (II) SELinux: Disabled on system

[    31.525] (II) AIGLX: Screen 0 is not DRI2 capable

[    31.526] (II) AIGLX: Screen 0 is not DRI capable

[    32.260] (II) AIGLX: Loaded and initialized swrast

[    32.260] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[    32.260] (II) VBoxVideo(0): Setting screen physical size to 270 x 203

[    33.119] (II) config/udev: Adding input device Power Button (/dev/input/event2)

[    33.119] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    33.119] (II) LoadModule: "evdev"

[    33.119] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    33.133] (II) Module evdev: vendor="X.Org Foundation"

[    33.133]    compiled for 1.12.1, module version = 2.7.0

[    33.133]    Module class: X.Org XInput Driver

[    33.133]    ABI class: X.Org XInput driver, version 16.0

[    33.133] (II) Using input driver 'evdev' for 'Power Button'

[    33.133] (**) Power Button: always reports core events

[    33.133] (**) evdev: Power Button: Device: "/dev/input/event2"

[    33.133] (--) evdev: Power Button: Vendor 0 Product 0x1

[    33.133] (--) evdev: Power Button: Found keys

[    33.133] (II) evdev: Power Button: Configuring as keyboard

[    33.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"

[    33.134] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    33.134] (**) Option "xkb_rules" "evdev"

[    33.134] (**) Option "xkb_model" "pc104"

[    33.134] (**) Option "xkb_layout" "us"

[    33.134] (**) Option "xkb_variant" "euro"

[    33.134] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"

[    33.329] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)

[    33.329] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[    33.329] (II) Using input driver 'evdev' for 'Sleep Button'

[    33.329] (**) Sleep Button: always reports core events

[    33.329] (**) evdev: Sleep Button: Device: "/dev/input/event3"

[    33.329] (--) evdev: Sleep Button: Vendor 0 Product 0x3

[    33.329] (--) evdev: Sleep Button: Found keys

[    33.329] (II) evdev: Sleep Button: Configuring as keyboard

[    33.329] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3/event3"

[    33.329] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)

[    33.329] (**) Option "xkb_rules" "evdev"

[    33.329] (**) Option "xkb_model" "pc104"

[    33.329] (**) Option "xkb_layout" "us"

[    33.329] (**) Option "xkb_variant" "euro"

[    33.329] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"

[    33.331] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)

[    33.331] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"

[    33.331] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'

[    33.331] (**) VirtualBox USB Tablet: always reports core events

[    33.331] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event1"

[    33.331] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21

[    33.331] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons

[    33.331] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)

[    33.331] (--) evdev: VirtualBox USB Tablet: Found relative axes

[    33.331] (--) evdev: VirtualBox USB Tablet: Found absolute axes

[    33.331] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes

[    33.331] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen

[    33.331] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen

[    33.331] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support

[    33.331] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5

[    33.331] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    33.331] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input1/event1"

[    33.331] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 8)

[    33.331] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.

[    33.332] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.

[    33.332] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1

[    33.332] (**) VirtualBox USB Tablet: (accel) acceleration profile 0

[    33.332] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000

[    33.332] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4

[    33.333] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)

[    33.333] (II) No input driver specified, ignoring this device.

[    33.333] (II) This device may have been added with another device file.

[    33.333] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)

[    33.333] (II) No input driver specified, ignoring this device.

[    33.333] (II) This device may have been added with another device file.

[    33.334] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    33.334] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[    33.334] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[    33.334] (**) AT Translated Set 2 keyboard: always reports core events

[    33.334] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"

[    33.334] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[    33.334] (--) evdev: AT Translated Set 2 keyboard: Found keys

[    33.334] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[    33.334] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    33.334] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)

[    33.334] (**) Option "xkb_rules" "evdev"

[    33.334] (**) Option "xkb_model" "pc104"

[    33.334] (**) Option "xkb_layout" "us"

[    33.334] (**) Option "xkb_variant" "euro"

[    33.335] (**) Option "xkb_options" "lv3:ralt_switch,compose:lwin"

[    33.341] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)

[    33.341] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"

[    33.341] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'

[    33.341] (**) ImExPS/2 Generic Explorer Mouse: always reports core events

[    33.341] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"

[    33.341] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6

[    33.341] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons

[    33.341] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)

[    33.341] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes

[    33.341] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes

[    33.341] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse

[    33.341] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support

[    33.341] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5

[    33.341] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    33.342] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"

[    33.342] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)

[    33.342] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.

[    33.342] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1

[    33.342] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0

[    33.342] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000

[    33.342] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4

[    33.343] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)

[    33.343] (II) No input driver specified, ignoring this device.

[    33.343] (II) This device may have been added with another device file.

[    33.345] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)

[    33.345] (II) No input driver specified, ignoring this device.

[    33.345] (II) This device may have been added with another device file.

[    33.511] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

...

Code:

[    54.899] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0

[    54.899] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.

[    54.899] (II) VBoxVideo(0): Using hsync ranges from config file

[    54.899] (II) VBoxVideo(0): Using vrefresh ranges from config file

[    54.899] (II) VBoxVideo(0): Printing DDC gathered Modelines:

[    54.899] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)

[    54.908] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

[    54.922] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0

[    54.922] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.

[    54.922] (II) VBoxVideo(0): Using hsync ranges from config file

[    54.922] (II) VBoxVideo(0): Using vrefresh ranges from config file

[    54.922] (II) VBoxVideo(0): Printing DDC gathered Modelines:

[    54.922] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)

[    56.013] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

[   108.205] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

[   116.299] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0

[   116.299] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.

[   116.299] (II) VBoxVideo(0): Using hsync ranges from config file

[   116.299] (II) VBoxVideo(0): Using vrefresh ranges from config file

[   116.299] (II) VBoxVideo(0): Printing DDC gathered Modelines:

[   116.299] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)

[   158.150] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

...

Code:

[   171.208] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0

[   171.208] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.

[   171.208] (II) VBoxVideo(0): Using hsync ranges from config file

[   171.208] (II) VBoxVideo(0): Using vrefresh ranges from config file

[   171.208] (II) VBoxVideo(0): Printing DDC gathered Modelines:

[   171.208] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)

[   171.247] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4

towo

Post subject:

Posted: 07.03.2013, 06:59

Joined: 2010-09-13
Posts: 513
Location: Pößneck / Thüringen
Status: Offline

You are using a conf in /etc/X11/xorg.conf.d/, what does it contain?

_________________

Code:

System:    Host: lenovo-nb Kernel: 4.1.0-towo.1 x86_64 (64 bit) Desktop: Cinnamon 2.4.8

           Distro: siduction 14.1.0 Indian Summer - cinnamon - (201411230307)

ganainm

Post subject:

Posted: 07.03.2013, 20:57

Joined: 2013-03-06
Posts: 4

Status: Offline

This is my first futile attempt:

Code:

Section "Monitor"

  Identifier "ThinkMon"

  VendorName "Lenovo"

  ModelName "Thinkpad"

  # 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz

  Modeline "1440x900@60.00"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync

EndSection

Section "Screen"

    Identifier "VBOX0"

    Device     "Card0"

    Monitor    "ThinkMon"

    SubSection "Display"

        Viewport  0 0

   Depth    1

    EndSubSection

    SubSection "Display"

        Viewport  0 0

   Depth    4

    EndSubSection

    SubSection "Display"

        Viewport  0 0

   Depth    8

    EndSubSection

    SubSection "Display"

        Viewport  0 0

   Depth    16

    EndSubSection

    SubSection "Display"

        Viewport  0 0

   Depth    24

    EndSubSection

EndSection

Section "Device"

    Identifier "Card0"

    Driver "vboxvideo"

EndSection

hubi

Post subject:

Posted: 09.03.2013, 22:24

Moderator

Joined: 2010-09-11
Posts: 228
Location: Vienna (AT)
Status: Offline

I don't use aptosid inside a VBox but other systems with aptosid being the host. Ususally installing virtualbox guest additions inside the VBox installation solves all resolution problems, they are handled automatically.

Hence my questions: Are virtualbox guest additions installed? Is the module vboxvideo loaded?

With those installed/implemented an Arch Linux guest inside an Aptosid host automatically adjusts resolutions (little window, seamless window, full screen). I don't have a xorg.conf, and it should not be required with the X server aptosid is shipping.

hubi

_________________
Tilos Rádió Budapest

ganainm

Post subject:

Posted: 10.03.2013, 11:22

Joined: 2013-03-06
Posts: 4

Status: Offline

After installing the VirtualBox Guest Additions and discarding the redundant xorg.conf file, everything works as expected, even with two monitors.

hubi

Post subject:

Posted: 10.03.2013, 22:19

Moderator

Joined: 2010-09-11
Posts: 228
Location: Vienna (AT)
Status: Offline

ganainm wrote:

After installing the VirtualBox Guest Additions and discarding the redundant xorg.conf file, everything works as expected, even with two monitors.

That's great news! Enjoy Aptosid!

hubi

_________________
Tilos Rádió Budapest

All times are GMT - 12 Hours

aptosid.com Forum Index » Support Forums » Software

Menu

Rootserver Sponsor

Donations

News

Blog