Hi There aptosidians 
Ive installed aptosid geras on an IBM Thinkpad T41
Code:
Host/Kernel/OS "aptosid-thinkpad" running Linux 2.6.37-0.slh.18-aptosid-686 i686 [ aptosid 2011-01 Γῆρας - kde-full - (201102052200) ]
CPU Info Intel Pentium M clocked at [ 1600.000 MHz ]
Videocard ATI Radeon Mobility M7 LW [Radeon Mobility 7500] X.Org 1.7.7 [ 1024x768@60.0hz ]
Network cards Intel 82540EP Gigabit
AIRONET Wireless Cisco Aironet Wireless 802.11b
Processes 105 | Uptime 13min | Memory 168.0/1009.6MB | HDD FUJITSU MHT2040A Size 37GB (7%used) | GLX Renderer Software Rasterizer | GLX Version Yes | Client Shell | Infobash v3.35
ifconfig displays the following related to my wlan card
Code:
eth1 Link encap:Ethernet HWaddr 00:0e:9b:2e:1d:1f
inet6 addr: fe80::20e:9bff:fe2e:1d1f/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:888 dropped:0 overruns:0 frame:888
TX packets:50 errors:50 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:11212 (10.9 KiB)
Interrupt:11 Base address:0x8000
Im trying to connect to a linksys wrt54g (ver.6) router with WPA2 personal encryption.
wpa-gui connects and disconnects constantly, and displays this error message
Code:
- Disconnect event - remove keys
when trying to connect to the router via ceni I get the following
Code:
Configuring interface eth1=eth1 (inet)
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/bridge
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
wpa_supplicant: using default driver type: wpa-driver wext
wpa_supplicant: /sbin/wpa_supplicant -s -B -P /var/run/wpa_supplicant.eth1.pid -i eth1 -D wext -C /var/run/wpa_supplicant
Starting /sbin/wpa_supplicant...
wpa_supplicant: waiting for "/var/run/wpa_supplicant.eth1.pid": 0 (max. 5)
wpa_supplicant: creating sendsigs omission pidfile: /lib/init/rw/sendsigs.omit.d/wpasupplicant.wpa_supplicant.eth1.pid
wpa_supplicant: ctrl_interface socket located at /var/run/wpa_supplicant/eth1
wpa_supplicant: configuring network block -- 0
wpa_supplicant: wpa-ssid "Los_Teritos" -- OK
wpa_supplicant: wpa-psk ***** -- OK
wpa_supplicant: enabling network block 0 -- OK
dhclient -v -pf /var/run/dhclient.eth1.pid -lf /var/lib/dhcp/dhclient.eth1.leases eth1
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth1/00:0e:9b:2e:1d:1f
Sending on LPF/eth1/00:0e:9b:2e:1d:1f
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 19
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
run-parts --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/000resolvconf
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/openssh-server
run-parts: executing /etc/network/if-up.d/wpasupplicant
Press Enter key to continue ...
setting the wlan card in roam mode with ceni displays this
Code:
Configuring interface eth1=eth1 (inet)
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/bridge
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
wpa_supplicant: wait for wpa_cli to attach
wpa_supplicant: using default driver type: wpa-driver wext
wpa_supplicant: /sbin/wpa_supplicant -s -B -P /var/run/wpa_supplicant.eth1.pid -i eth1 -W -D wext -c /etc/wpa_supplicant/wpa-roam.conf
Starting /sbin/wpa_supplicant...
wpa_supplicant: waiting for "/var/run/wpa_supplicant.eth1.pid": 0 (max. 5)
wpa_supplicant: creating sendsigs omission pidfile: /lib/init/rw/sendsigs.omit.d/wpasupplicant.wpa_supplicant.eth1.pid
wpa_supplicant: ctrl_interface socket located at /var/run/wpa_supplicant/eth1
run-parts --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/000resolvconf
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/openssh-server
run-parts: executing /etc/network/if-up.d/wpasupplicant
wpa_supplicant: /sbin/wpa_cli -B -P /var/run/wpa_action.eth1.pid -i eth1 -p /var/run/wpa_supplicant -a /sbin/wpa_action
Starting /sbin/wpa_cli...
Press Enter key to continue ...
iwlist command returns the following
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
irda0 Interface doesn't support scanning.
eth1 Scan completed :
Cell 01 - Address: 00:1C:10:2C:48:0C
ESSID:"Los_Teritos"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=73/100 Signal level=-59 dBm Noise level:0 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Extra:bcn_int=100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
setting my network under WPA personal gets same error, setting it to WEP or non secured connects without any problems.
Any help is much appreciated
Wolf. |
.