Sorry if this is the wrong section to post this.
Not sure when I acquired this error, however, it had to have been over one of the last couple DU's.
When using 'sux', I get the following error:
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
I looked at the 'sux' script, but nothing immediately stood out.
I've noticed that during a sux session, using CTRL-C to terminate a process (like a simple host ping) doesn't work. Instead, it exits the sux session and then requires that I become root again to kill it (the runaway process).
root@aptosid-ss9:/home/cwww# ping 18.104.22.168
PING 22.214.171.124 (126.96.36.199) 56(84) bytes of data.
64 bytes from 188.8.131.52: icmp_req=1 ttl=45 time=38.0 ms
64 bytes from 184.108.40.206: icmp_req=2 ttl=45 time=38.5 ms
64 bytes from 220.127.116.11: icmp_req=3 ttl=45 time=38.3 ms
64 bytes from 18.104.22.168: icmp_req=4 ttl=45 time=38.1 ms
64 bytes from 22.214.171.124: icmp_req=5 ttl=45 time=36.6 ms
Session terminated, terminating shell...64 bytes from 126.96.36.199: icmp_req=6 ttl=45 time=39.7 ms
64 bytes from 188.8.131.52: icmp_req=7 ttl=45 time=37.9 ms
cwww@aptosid-ss9:~$ 64 bytes from 184.108.40.206: icmp_req=8 ttl=45 time=87.1 ms
64 bytes from 220.127.116.11: icmp_req=9 ttl=45 time=38.6 ms
64 bytes from 18.104.22.168: icmp_req=10 ttl=45 time=38.1 ms
64 bytes from 22.214.171.124: icmp_req=11 ttl=45 time=38.3 ms
Any hint would be helpful. Thanks!
Host/Kernel/OS "aptosid-ss9" running Linux 3.2-11.slh.3-aptosid-amd64 x86_64 [ aptosid 2010-03 Ἀπάτη - kde-full - (201012262151) ]
CPU Info 4x Intel Core i5-2537M @ 3072 KB cache flags( sse3 ht nx lm vmx ) clocked at [ 800.000 MHz ]
Videocard Intel 2nd Generation Core Processor Family Integrated Graphics Controller X.Org 1.11.4 [ firstname.lastname@example.org ]
Network cards Realtek RTL8111/8168B PCI Express Gigabit
Broadcom BCM43225 802.11b/g/n
Processes 185 | Uptime 1day | Memory 2241.2/3873.7MB | HDD SAMSUNG MZMPA128 Size 128GB (35%used) | Client Shell | Infobash v3.45