laptop is dell vostro (AMD A6-3400) with radeon hd 6250 graphics
I don't have an ATI card, so I can't say how they behave.
old post return...
still unable to use the resume after reopening the lid
result of infobash -v3 :
Host/Kernel/OS "portab2" running Linux 3.5-0.slh.3-aptosid-amd64 x86_64 [ aptosid 2011-03 Πόνος - kde-full - (201112312100) ]
CPU Info 4x AMD A6-3400M APU with Radeon HD Graphics 1024 KB cache flags( sse3 ht nx lm svm ) clocked at [ 800.000 MHz ]
Videocard Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6520G] [ ]
Network cards Realtek RTL8111/8168B PCI Express Gigabit
Atheros AR9285 Wireless
Processes 150 | Uptime 12min | Memory 521.9/3432.6MB | HDD SAMSUNG HM500JJ Size 500GB (20%used) | Client Shell | Infobash v3.45
result of cat /proc/acpi/wakeup:
Device S-state Status Sysfs node
SBAZ S4 *disabled pci:0000:00:14.2
P0PC S4 *disabled pci:0000:00:14.4
PE20 S4 *disabled pci:0000:00:15.0
PE21 S3 *disabled pci:0000:00:15.1
UHC1 S0 *enabled pci:0000:00:12.0
UHC2 S0 *enabled pci:0000:00:12.2
USB3 S0 *enabled pci:0000:00:13.0
UHC4 S0 *enabled pci:0000:00:13.2
USB5 S0 *disabled
UHC6 S0 *disabled
XHC0 S0 *enabled pci:0000:00:10.0
XHC1 S0 *enabled pci:0000:00:10.1
PCE4 S4 *disabled pci:0000:00:04.0
LID S3 *enabled
this is very ennoying for me, since because of this (and a few other "details"), i have to use an other os (kubuntu) when working, while my initial choice would be aptosid...
as i do not know what to do i request some help in order to get my laptop working fully under aptosid. Tell me how to get more infos and trying to get resume work, please...
by the way i have firmware-linux and firmware-linux-nonfree installed.
i know this is an other topic, but as i never get any answer i just mention this here in case, the other problems are :
during boot, long standby if i am in a place with no available network (long dhcp waiting) before boot completes.
could'nt find a way to use the network management app in the systray (instead of knemo wich only show infos without giving the possibility to modify network settings)
touchpad interferences with keyboard (cursor jumps anywhere and i have to manualy start syndaemon since in a script at startup it was making system mad)
looking forward for some help/info, thanks